0.75 kW, 2000 rpm — what the ratings mean on a real line
The 1FL6061-1AC61-0LG1 is a SIMOTICS S-1FL6 servo motor rated 0.75 kW at 2000 rpm nominal speed, with a stall torque M0 of 4 Nm and a rated torque MN of 3.58 Nm. That torque curve suits indexing, pick-and-place, and light conveyor drives where the load cycle stays within the continuous duty zone — the 3.58 Nm figure is the thermal limit at rated speed, not a peak. Shaft height is 65 mm with a plain shaft (no keyway), tolerance N. The motor ships without a holding brake — if the vertical axis needs position hold at power-off, you add an external brake or spec the braked variant. IP65 with the sealing ring fitted means the motor body handles washdown spray; the sealing ring at the shaft exit is the wet-end barrier, not the housing itself.
Encoder resolution and drive pairing
The absolute encoder is 20-bit plus 12-bit multi-turn — that gives 1,048,576 positions per revolution and 4,096 absolute turns. No homing sequence on power-up; the drive reads the position from the encoder's multi-turn count. Compatible with SINAMICS V70 and V90 servo drives — the encoder interface and motor feedback cable are matched to those drive families.
Sourced through authorized distribution channels against an RFQ. Volume pricing and lead time confirmed at quote time; no stock-holding claim on this listing.