Motor ratings and drive pairing
The 1FL6062-1AC61-0LA1 is a SIMOTICS S-1FL6 servo motor rated 1 kW at 2000 rpm nominal speed, delivering 4.78 Nm continuous torque and 6 Nm peak torque at standstill (M0). It operates on 400 V three-phase AC and is explicitly listed as compatible with SINAMICS V70 and V90 servo drives — the drive selection must match the motor's voltage class and encoder interface. The absolute encoder is 20-bit resolution with 12-bit multi-turn capability, meaning position is retained over 4096 shaft revolutions after power loss — critical for applications that must home without a reference run.
IP65 and environmental sealing
The sealing ring is a separate component that must be fitted at installation; without it the IP rating drops. Verify the ring is present in the shipment before commissioning.
Mechanical interface and brake note
Shaft height is 65 mm with a feather key and tolerance N — the keyway and shaft fit follow standard IEC mounting dimensions for this frame size. No holding brake is fitted on this variant, so the load must be held by the drive's holding brake or an external mechanical brake when power is off.