What the order code actually decodes to
Siemens lists 1FL6062-1AC61-2LG1 inside the 1FL6 low-inertia servomotor family, which pairs with the SINAMICS V70 and V90 converter platforms — that compatibility is the first thing to lock before the motor hits the panel, because the V90 firmware profile is what recognizes the encoder resolution and the torque envelope at first power-up. The nameplate envelope reads 3AC 400 V operating voltage, Pn = 1 kW, Nn = 2000 rpm, M0 = 6 Nm continuous stall, MN = 4.78 Nm rated, shaft height 65 mm, angle plug, absolute encoder 20-bit (12-bit multi-turn), plain shaft with tolerance N, and no holding brake — so any retrofit has to keep the 65 mm shaft height and accept that stopping is handled by the drive's ramp, not a mechanical brake. IP65 with the supplied sealing ring is the enclosure rating on the record; the rating depends on the ring being seated at the cable entry — the body alone is not the wet-end barrier, so the field install has to land that seal before washdown or outdoor mounting is honest.
Production status versus the listed lifecycle stage
Siemens carries current on the catalog line for 1FL6062-1AC61-2LG1, but the productStatus field reads NRND — meaning the part is on the manufacturer's not-for-new-design watch and existing installations remain supported while stock is wound down, which is exactly the situation procurement freezes a BOM over. Class C on this row is products manufactured / produced to order, which cannot be reused or re-utilized and are not returnable against credit — orders are built per BOM quantity, so a one-piece buy carries the same build slot as a panel run and no cancellation window once the order books.
Compliance and ordering metadata
The catalog assigns this motor to Group Code R220 inside Product Group 5183, ships one piece per package at 392.00 x 269.00 x 290.00 mm, and carries no export-control flag (AL: N / ECCN: N) — the latter matters because it removes the ECCN paperwork step that sometimes delays cross-border orders.