1.5 kW at 2000 rpm — the torque curve that matters
The 1FL6064-1AC61-0LA1 is a SIMOTICS S-1FL6 servo motor rated 1.5 kW at 2000 rpm nominal speed, with a standstill torque M0 of 8 Nm and a rated torque MN of 7.16 Nm. The 20-bit absolute encoder (12-bit multi-turn) gives position feedback without a home cycle on power-up — the drive knows the shaft angle from the last powered state. This matters for applications where the machine must resume position after a power loss without re-referencing.
IP65 and sealing ring — washdown-ready without the brake
The sealing ring sits between the motor flange and the mating surface; if the ring is missing or damaged during installation, the IP rating drops to the unprotected motor body. No holding brake on this variant — the load must hold position through the drive's holding torque or an external brake.
SINAMICS V70 and V90 drive pairing
Listed as compatible with SINAMICS V70 and V90 converters — these are Siemens' compact servo drives for basic positioning and speed control. The 400 V 3 AC operating voltage matches the drive's power stage; the 20-bit encoder interface is supported natively by the V90's encoder input. No adapter cable or signal converter needed between the motor and the matching drive unit.