Motor specs and drive pairing
The 1FL6067-1AC61-0AG1 is a SIMOTICS S-1FL6 servo motor rated 2 kW at 2000 rpm, with a standstill torque M0 of 15 Nm and a rated torque MN of 9.55 Nm. It runs on 400 V three-phase AC and is explicitly listed as compatible with SINAMICS V70 and V90 drives — that pairing is factory-validated, so no guesswork on the drive side. Shaft height is 65 mm, plain shaft with tolerance N, no holding brake. The incremental encoder is TTL, 2500 increments per revolution — fine enough for most positioning tasks on a 2 kW axis, but if you need absolute feedback for multi-turn position retention, this motor won't deliver it without an external encoder interface.
IP65 and washdown deployment
IP65 protection with the sealing ring means the motor body is dust-tight and protected against low-pressure water jets — suitable for food-and-bev washdown zones or outdoor cabinet-top mounting where coolant mist is present. The sealing ring must be seated correctly at installation; a missing or pinched ring drops the rating to IP54 in practice.