Motor ratings that decide the fit
The Siemens 1FL6067-1AC61-0LH1 is a SIMOTICS S-1FL6 servo motor rated 2 kW continuous power at 2000 rpm nominal speed, with a 9.55 Nm rated torque and 15 Nm stall torque. The 20-bit absolute encoder (12-bit multi-turn) gives you position feedback down to sub-arcminute resolution — no homing sequence needed after a power cycle if the multi-turn count is maintained. Shaft height is 65 mm with a plain shaft, tolerance N, and a holding brake holds the load at standstill. The IP65 rating with the sealing ring means the motor body and shaft seal survive washdown environments — common on packaging and food processing lines where hose-down cleaning is routine.
Compatible drive pairing
This motor is explicitly compatible with SINAMICS V70 and V90 servo converters. The 400 V three-phase operating voltage matches the drive's power stage; the encoder interface is the standard 20-bit Hiperface DSL or similar protocol that V90 drives support natively — no separate encoder converter needed.