SIMOTICS S-1FL6 1FL6067-1AC61-2AB1 — what you're sourcing
The SIMOTICS S-1FL6 1FL6067-1AC61-2AB1 is a low-inertia servomotor in the 1FL6 family, sized for operation on 3AC 400 V with a rated power of 2 kW at 2000 rpm and a stall torque of 15 Nm (continuous rated torque 9.55 Nm). It carries an angle plug, an incremental encoder at 2500 increments/rev, a feather-key shaft to tolerance N, and an integrated holding brake — the configuration a SINAMICS V70 or V90 drive expects on the motor side of the loop.
Mechanical and environmental envelope
Shaft height is 65 mm and the housing carries IP65 with a sealing ring, so the motor tolerates the dust and coolant splash typical of a machining cell or packaging line when the connector is fully mated. The 466 x 264 x 290 mm shipping carton (1 Piece) reflects the brake-equipped 2 kW frame rather than the bare-motor shipping size.
Cross-border compliance posture
Catalog classification is Group Code R220 / Product Group 5183 with a Class C line — products manufactured to order that cannot be reused or returned against credit. Export control is rated AL:N / ECCN:N, so the part ships without an export licence gate on either side.
Lifecycle status — NRND and what that means for the BOM line
Lifecycle stage is listed as NRND (Not Recommended for New Design), and the catalog class marks the unit as built-to-order, non-returnable — plan the next BOM review to migrate volume to the active 1FL6 successor before the line lands on last-time-buy terms. For existing fleets, the 1FL6067-1AC61-2AB1 is sourced per RFQ against the BOM: spare-unit deliveries and field replacement are quoted to order through independent distribution with lead time and quantity confirmed at quote. No price or stock figure is asserted; availability is the response to an RFQ.