Servomotor fit on a SINAMICS V70/V90 axis
The 1FL6067-1AC61-2AH1 is a SIMOTICS S-1FL6 servomotor in the 1FL6 family, sized for SINAMICS V70 and V90 converters — meaning the motor, encoder, and brake wiring are matched to the drive's commissioning tool and resolver/encoder slot, not a generic third-party pairing. Operating voltage is 3AC 400 V with a rated power Pn of 2 kW and rated speed Nn of 2000 rpm; standstill torque M0 is 15 Nm and rated torque MN is 9.55 Nm, so the motor's continuous working envelope sits below the peak — the 15 Nm figure is the short-term overload headroom the drive exploits during acceleration. Shaft height 65 mm with an angle plug, plain shaft, tolerance N, holding brake, and 2500 incr./rev incremental encoder — the brake eliminates the need for an external holding circuit on vertical axes, and the incremental (not absolute) encoder means the drive performs a homing run on every power-up.
IP65 sealing on a washdown-adjacent shop floor
IP65 with sealing ring on a 1FL6 shaft-height-65 servo means the motor body resists dust and low-pressure water jets, which is what panel-builders expect when the motor sits near a machine's wet zones — but it is not rated for full immersion or high-pressure washdown, so mounting under a coolant stream is not the intended installation.
Lifecycle read — current build vs. NRND notice
The product-level lifecycle field lists stage as 'current', but the manufacturer's notice flags this MPN as NRND — meaning the order code still ships for active projects but the factory has signalled last-time-buy timing for the family. Buyers filling a new BOM should plan replacement timing, not assume indefinite availability. Export control classification is AL:N / ECCN:N, so the part ships without an export licence gate to most destinations; that simplifies cross-border sourcing for North American and Asia-Pacific panel builders filling the same BOM. Internal catalog codes on the line are Group Code R220 within Product Group 5183 — useful for matching the Siemens ordering system against a third-party PO when the description line on the invoice has been truncated.