What the motor is and where it lands
The 1FL6067-1AC61-2LG1 is a SIMOTICS S-1FL6 low-inertia servo in the 1FL6 family, built to pair with the SINAMICS V70 and V90 converters on a 3AC 400 V bus, with 2 kW rated power at 2000 rpm, 9.55 Nm rated torque, 15 Nm stall torque, and a 65 mm shaft height. It ships with a 20-bit absolute encoder (12-bit multi-turn), a plain shaft without a holding brake, an IP65 sealing ring on the body, and a rotatable angle plug for the power and feedback harness — the standard fit-out for a V90 line.
Encoder, brake, and shaft detail buyers check first
The encoder is 20-bit single-turn with 12-bit multi-turn resolution — enough to retain absolute position across power cycles without a battery box on most machine axes, which is why the V90 converter recognizes this motor without parameter hand-entry at first commissioning. No holding brake on this variant. Vertical-axis applications that need a fail-safe stop have to source a brake-equipped 1FL6 sibling or add an external holding mechanism, because the plain-shaft build cannot hold position on its own when the drive enable drops.
Lifecycle status: NRND, what that changes
The part is listed NRND — the manufacturer still produces it for existing V90 installations but is steering new designs toward the current-generation alternative. Spec rows used by the Siemens configurator still resolve the code as "current," while the lifecycle stage on this listing is NRND; the practical read is that long-tail spares are available but the family is on a soft wind-down. Group Code R220 and Product Group 5183 are the Siemens internal keys for order routing and rebate calculation — they confirm the part ships under the 1FL6 servomotor family and not a successor platform, so a cross-reference to a current 1FL6 build keeps the BOM family intact.
Compliance and shipping
RoHS compliance has been in force since 01-01-18 and REACH Article 33 candidate-list information is published by Siemens on the product page — the motor ships into both EU and RoHS-equivalent jurisdictions without a special-handling flag. Export control is AL:N / ECCN:N, so the unit leaves the EU without a dual-use license for the listed destinations. Packaging is one piece per box at 466 x 264 x 290 mm, and the product is built to order under class C — produced per order spec, not returnable for credit.