What 1FL6096-1AC61-2AA1 is, in plain numbers
The 1FL6096-1AC61-2AA1 is a SIMOTICS S-1FL6 low-inertia servomotor from the 1FL6 family, sized for the SINAMICS V70 and V90 drive platform — 3-phase 400 V supply, rated power 7 kW at a nominal speed of 2000 rpm, with a continuous standstill torque of 40 Nm and a rated torque of 33.4 Nm at the operating point. Mechanical side is shaft height 90 mm, feather-keyed shaft with tolerance N, angle plug for the power/feedback loom, and an incremental encoder at 2500 increments per revolution — the resolution that decides following-error behaviour on a position loop, not the headline kW figure. Body sealing is IP65 with the sealing ring fitted — meaning the motor body tolerates dust and low-pressure water jets but is not rated for full immersion or high-pressure washdown; it sits inside a cabinet or a sheltered machine frame, not out in the wet end of a process line.
Lifecycle read — NRND on the motor, current on the configuration record
Lifecycle status for the 1FL6096-1AC61-2AA1 is recorded as NRND — Not Recommended for New Designs. That puts the unit in the window where the factory will still accept orders for a defined period but is steering new machine builds toward successor framings within the same 1FL6 family. Spare-parts demand for lines already running this motor stays serviceable, but specifying it into a new BOM should trigger a conversation with the controls house about which 1FL6 frame the V90 firmware revision on the line will accept next. Group code R220 and product group 5183 are the internal classification keys a storeroom or ERP record will reference against the MPN. The product is sold under class C: produced to order with no return-for-credit pathway. Each unit ships as a single piece in packaging of 495 × 365 × 340 mm — relevant for the receiving dock rather than for fit, but worth flagging when planning a replacement stock delivery into a storeroom with limited bench space.
Where a 400 V 7 kW 1FL6 sits in a real machine
The 1FL6096-1AC61-2AA1 is the motor half of a Siemens V90 system — feed drives, indexing tables, small CNC auxiliaries, packaging-machine rotary cutters, labelling heads, and similar mid-power positioning axes where 7 kW continuous and a 2000 rpm base speed are the right envelope. Pairing it with a SINAMICS V90 drive closes the loop through the incremental encoder feedback at 2500 incr./rev., which at 2000 rpm gives the position controller a deterministic sampling rate to work against — the property that holds the micron on a repeated cut, not the motor's continuous torque number on its own.