Where this 1FT2 lands in the motion stack
The 1FT2205-2AH10-0RB0-Z P90+Q01 is a SIMOTICS S-1FT2 CT-frame synchronous servo rated at PN=1.06 kW at nN=4500 r/min with a continuous stall torque M0=3.6 Nm (cites:) — the size that typically drives small indexing tables, packaging cross-seals, and lab/medical feed axes where a holding brake and a 2-pole resolver are part of the BOM, not optional extras. It ships with the holding brake integrated, a 2-pole resolver for commutation, and a Pt1000 in the windings for thermal protection — feedback and brake bundled into the shaft assembly so the upstream SINAMICS drive closes the torque loop without needing a third-party encoder bracket (cites:). Both the power lead and the signal lead exit through M17 connectors, which means the cabinet-side mating connectors are the same Siemens M17 family used across the S-1FT2 generation — the panel builder only needs one cordset part number on the BOM, not two (cites:).
What the configuration codes actually buy you
The trailing -Z P90+Q01 suffix is a configurator string, not a separate catalog line: P90 specifies bulk packaging of 33 units per carton for production runs, and Q01 is the configurator reference that fixes the exact option set encoded into the base order code 1FT2205-2AH10-0RB0 (cites:). On a single-unit RFQ the part ships in the standard pack rather than the bulk carton, but the motor itself is identical. Group Code R220 and Product Group X033 are Siemens-internal classification slots, not ratings — they exist so the configurator and the order-entry system route the line through the same production cell (cites:,). Product class is the made-to-order class C: built to the configuration, non-returnable, non-reusable — there is no cancellation window once the order hits the factory floor (cites:,).
Compliance and export posture
RoHS compliance is documented since 11-02-21, with REACH Article 33 candidate-list disclosure bundled in the standard product documentation (cites:,). No UL/IEC approval string is carried on the spec record itself — the panel builder confirms the UL file for the assembly, not the individual motor, when the cabinet goes into a listed enclosure. Export-control markings are AL:N and ECCN:N_CNDU, which means no export licence is required for typical commercial destinations (cites:). For a motor of this power class that is the expected posture, but a buyer shipping into a dual-use or embargoed destination still runs the standard ECCN check at the order desk.
Lifecycle read and the sourcing reality
For a BOM that names 1FT2205-2AH10-0RB0-Z P90+Q01, the part is still orderable through the standard Siemens configurator channel.