What the rating means on the shaft
The 1FT2206-2AF10-0RB0-Z P90+Q01 is a SIMOTICS S-1FT2 CT-frame synchronous servo motor rated M0 = 6.5 Nm stall torque with PN = 1.71 kW continuous at nN = 3000 r/min, which sets the sizing envelope for mid-range dynamic axes — packaging indexing heads, small CNC feed axes, and short-stroke pick-and-place slides sit squarely inside this power class. The resolver 2-pole feedback plus integrated Pt1000 gives absolute commutation within one electrical revolution and winding-temperature monitoring in a single cable bundle; pair it with a SINAMICS drive that accepts the M17 signal connector and the M23 power connector and commissioning is a plug-in job rather than a wiring exercise.
Made-to-order packaging and the Z options
Product class is C — built per order, no return credit — so the P90 (bulk packaging of 20 units) only makes sense when 20 axes are going out the door together; one-off spares are still orderable, but expect the same made-to-order terms. The Z suffix on the order code carries the P90 and Q01 supplementary options as a combined variant; specify the bare -2AF10-0RB0 code when you need the single-unit pack instead.
Why the peer codes are not a swap
The closest peer codes in the same R220 group family are SINAMICS V20 basic converters and SINAMICS air-cooled power modules — a VFD on one side, a motor on the other. There is no drop-in mechanical or electrical equivalence: the servo motor's M17 signal connector and M23 power connector do not mate with the SINAMICS drive-side terminals without the matched cable set.