Matching this motor to the drive and the axis
The 1FT2206-2AF10-0RB0-Z Q01 is a SIMOTICS S-1FT2 CT synchronous servo with M0 = 6.5 Nm stall torque and PN = 1.71 kW at nN = 3000 r/min, so the continuous-power window is set by that single speed point — sizing a SINAMICS line around the rated 3000 r/min keeps the motor out of field-weakening for typical positioning duty. Feedback is resolver 2-pole with an integral Pt1000, terminated through an M17 signal connector and an M23 power connector — that combination points at a SINAMICS S120 drive on the standard SIMOTICS 1FT2 commissioning map rather than a third-party controller without the matching cable set. The -Z Q01 option code is a customer-specific add-on to the base 1FT2206-2AF10-0RB0 motor; ordering data carries it as a made-to-order line that is non-returnable per the product class definition.
Build, holding brake, and panel-side integration
The integrated holding brake suits vertical axes where the load must hold position with the drive disabled — confirm the brake voltage variant on the -Z Q01 option sheet before the panel is wired, because the brake leads route through the same M23 power connector on the 1FT2 frame. For thermal protection, the Pt1000 in the stator windings feeds the drive's temperature model input; on a SINAMICS S120 this lands on a dedicated analog channel and the drive limits torque automatically when the winding temperature trips the configured threshold. Resolver 2-pole feedback is the lower-resolution option versus an absolute encoder — adequate for standard positioning and synchronized motion, but if the application needs safe absolute position after power-cycle without a referencing move, an encoder-equipped sibling in the 1FT2 family is the answer instead.
Compliance posture and export classification
Export control is classified AL:N with ECCN N_CNDU, meaning no export licence is triggered for typical commercial destinations under the listed regulation set — still worth a final ECCN check on the shipping paperwork if the machine is destined for an embargoed country. Lifecycle status is current and production remains active; with no PCN or last-time-buy notice on the ledger, stocking this part as a running spare aligns with normal service-interval planning rather than an end-of-life contingency.
Sourcing posture for the storeroom
Ordering data tags the unit as product class C — manufactured to order, no return credit, one piece per quantity unit — so a request for quote should include the full -Z option string (Q01) to avoid the factory building against an incomplete configuration.