Skip to main content
Siemens 3RA2110-1AE15-1BB4 — Motor Starters

Siemens 3RA2110-1AE15-1BB4 SIRIUS Direct Starter, 1.6 A AC-3

MPN3RA2110-1AE15-1BB4
Active

Siemens SIRIUS 3RA2110-1AE15-1BB4 direct-on-line starter, Size S00, AC-3 1.6 A at 400 V, 24 V DC coil, Class 10, screw and snap-on 35 mm DIN rail, spring-loaded terminals.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

3RA2110-1AE15-1BB4 — Identification
ParameterValue
Product designationDirect (on-line) starter
Main circuit poles3
BrandSIRIUS
Load feeder sizeS00
Product design / constructionfor standard rail or screw mounting
Circuit-breaker sizeS00
Included contactor (type)3RT2015-2BB41
Included circuit-breaker (type)3RV2011-1AA20
Included link module (type)3RA2911-2AA00
3RA2110-1AE15-1BB4 — Ratings & Performance
ParameterValue
Rated motor power at 400 V550 kW
Rated voltage at AC-3, max.690 V
Rated motor power at 460/480 V (hp)1 hp
Rated motor power at 575/600 V (hp)1 hp
Rated current at 480 V1.6 A
Rated current at 600 V1.6 A
Rated operating frequency50 ... 60 Hz
Rated impulse withstand voltage (Uimp)6 kV
Rated insulation voltage Ui (AC, pollution degree 3)690 V
3RA2110-1AE15-1BB4 — Protection & Tripping
ParameterValue
Trip classCLASS 10
Short-circuit protectionYes
Rated short-circuit current at 400 V (IEC 60947-4-1)150 000 A
Overload release setting range (current)1.1 ... 1.6 A
Overload release typethermal (bimetallic)
Short-circuit trip typemagnetic
Duty / utilization type (IEC 60947-6-2)2
3RA2110-1AE15-1BB4 — Contacts & Control
ParameterValue
Rated value24 ... 24 V
Control supply voltage typeDC
Auxiliary switch extensionYes
Switching contact typeelectromechanical
3RA2110-1AE15-1BB4 — Communication
ParameterValue
AS-Interface protocol supportNo
3RA2110-1AE15-1BB4 — Mechanical & Connection
ParameterValue
Mounting / fastening methodscrew and snap-on mounting onto 35 mm DIN rail
Mounting positionvertical
Width45 mm
Height198 mm
Depth97 mm
3RA2110-1AE15-1BB4 — Environmental
ParameterValue
Operating temperature range-20 ... +60 °C
Storage temperature range-50 ... +80 °C
Transport temperature range-50 ... +80 °C
Shock resistance (IEC 60068-2-27)6g / 11 ms

Product details

SIRIUS Size S00 — 1.6 A AC-3 at 400 V

The 3RA2110-1AE15-1BB4: The unit ships as a complete assembly: the supplied contactor is a 3RT2015-2BB41, and the link module is 3RA2911-2AA00 — everything pre-wired and ready to snap onto the DIN rail. The main current circuit uses spring-loaded terminals, so no screwdriver needed for the power wiring; the control coil is rated 24 V DC.

Panel fit — DIN rail clearances

The mounting position is vertical only, and the required clearances around the unit are: 50 mm above, 20 mm forward, 20 mm at the sides, 10 mm below, and 0 mm behind — so it can sit flush against the back panel. This matters when laying out a dense control panel: the 45 mm width lets you pack several starters side by side, but the 50 mm top clearance is non-negotiable for heat dissipation and arc-fault containment. Operating ambient temperature range is -20 to +60 °C, with storage and transport range from -50 to +80 °C.

Lifecycle and sourcing

Compliance documentation includes RoHS substance prohibitance dated 10/01/2009. For specific certification documentation, the factory declaration of conformity should be requested at order.

Frequently asked questions

What is the AC-3 rated current of this starter at 400 V?

The AC-3 rated current at 400 V is 1.6 A. This is the motor-switching current, suitable for small three-phase motors up to about 0.75 kW (1 hp).

What terminals does the main circuit use?

The main current circuit uses spring-loaded terminals — push-in type for solid or ferruled stranded wire, no screwdriver needed for power connections.

MPN
3RA2110-1AE15-1BB4