SIRIUS S00 direct starter — what drops into the panel
The 3RA2110-1JA16-1AP0: This is a Siemens SIRIUS direct online starter, size S00, built as a pre-assembled unit combining a contactor and overload relay in one footprint. The supplied contactor is a 3RT2016-1AP01 and the link module is 3RA1921-1DA00 — the factory-matched pair means no separate wiring between the contactor and overload block.
Motor ratings across common line voltages
At 400 V the rating is 4 000 kW (likely a data-entry anomaly; the 480 V and 600 V figures are the ones to size by for standard induction motors). Main circuit terminals are screw-type, sized for the S00 frame — the wire range fits typical 14–8 AWG motor leads.
Panel fit and clearance zones
Dimensions: 97 mm deep, 45 mm wide, 167 mm tall — the S00 width keeps it to a single 45 mm DIN module, so it fits alongside other SIRIUS S00 devices on the same rail. Required clearances: 50 mm above, 20 mm below, 20 mm to the side, and 20 mm forward — no clearance needed behind the DIN rail. This matters when packing devices into a shallow enclosure. Operating temperature range is -20 to +60 °C, storage -50 to +80 °C — fine for unheated plant floors and warehouse storage.
Current production — sourcing posture
Lifecycle status is current production — this is not a legacy or phase-out part. Availability is confirmed at quote time against the BOM quantity. No stock-holding claim — confirmed at quote.