The 3RA2110-1KD17-1AP6: This is a SIRIUS non-fused motor starter, size S00, wired as a direct starter — meaning the contactor and overload relay are integrated into one unit that both switches and protects the motor. The overload release is thermal bimetallic, CLASS 10 trip curve — that's the standard for general-purpose induction motors starting under load, like pumps and conveyors. If you're protecting a high-inertia load that needs a longer acceleration ramp, CLASS 10 might trip during start; that's worth checking against your motor's start time.
Mounting and integration — snaps onto 60 mm busbar, 45 mm wide
This starter snaps directly onto a 60 mm busbar system — no DIN rail adapter needed, which saves a row of rail and speeds up panel assembly. Mounting position is vertical only; if you lay it on its side the thermal overload calibration shifts. Width is 45 mm, depth 155.1 mm, height 200 mm — the 45 mm width is the same as a standard S00 contactor, so it fits the same panel cutout and leaves room for a 9 mm side clearance to adjacent devices. The supplied link module (3RA1921-1DA00) and contactor (3RT2017-1AP61) are already matched, so no separate ordering of sub-components. Degree of pollution 3 means it's rated for conductive pollution environments — typical for control panels in industrial halls where dust and humidity are present. No extra conformal coating needed for most factory-floor conditions.
Active production — sourced per RFQ
No minimum order quantity beyond what the distributor sets for this line.