The 3RA2115-0EE15-1FB4: It ships as a complete assembly: a 3RT2015-2FB41 contactor, a 3RA2911-2AA00 link module, and a 3RV2011-0EA25 circuit-breaker with magnetic short-circuit and thermal bimetal overload release, all pre-wired and tested.
Mounting, wire-up, and the clearance numbers that matter
Clearance requirements are tight: 50 mm upwards, 20 mm forwards, 10 mm downwards, and 20 mm at the side — no clearance needed backwards, so you can push it against the back panel. Main power circuit uses spring-loaded terminals — strip the wire, push it in, no screwdriver needed for the power connections. That saves time on a multi-starter panel and eliminates the risk of a loose screw vibrating out.
Environmental limits and what they mean for the enclosure
Operates from -20 to +60 °C ambient, with temperature compensation built into the bimetal overload over that same range — so the trip point stays accurate whether the panel is in a cold warehouse or next to a hot process line. Storage and transport range is -50 to +80 °C, meaning it can sit in an unheated container or a hot truck without damage, as long as it's not powered up outside its operating band. Rated coil voltage is 24 V AC/DC — the 24... 24 V entry confirms it's a fixed 24 V coil, not a wide-range type. Make sure your control transformer or PSU is sized for the inrush of the contactor magnet.
Lifecycle status and how to source it
No stock-holding claim — lead time confirmed per RFQ.