Rated for a 250 W motor at 400 V — the Class 10 trip matters
The 3RA2115-0JE15-1FB4: At 400 V AC-3 duty, this starter handles a 250 W motor load. The magnetic short-circuit trip is part of the supplied 3RV2011-0JA25 breaker, so the starter provides both overload and short-circuit protection in one package.
Mounting and panel fit — 45 mm wide, screw or snap-on
Width is 45 mm, depth 97 mm, height 198 mm. It mounts on a 35 mm standard DIN rail with a snap-on feature, or can be screw-mounted directly to a backplate. The mounting position is vertical, with 50 mm clearance above, 20 mm forward, and 20 mm at the side — no clearance needed behind. Both the main current circuit and the auxiliary/control circuit use spring-loaded terminals — no screw tightening, just push the stripped wire in. An auxiliary switch can be added via the product extension slot.
Environmental range and compliance
Relative humidity during operation is 10 to 95 %. The degree of protection is listed as 'other' (not a standard NEMA rating), so confirm the enclosure fit for washdown or dusty environments.