Skip to main content
Siemens 3RA2115-1GD15-1AP6 — Motor Starters

Siemens 3RA2115-1GD15-1AP6 SIRIUS Motor Starter

MPN3RA2115-1GD15-1AP6

Siemens SIRIUS 3RA2115-1GD15-1AP6 non-fused motor starter, size S00, direct starter design, Class 10 thermal bimetallic overload, 5 hp at 575/600 V, 45 mm wide, snaps onto 60 mm busbar.

StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

Identification

3RA2115-1GD15-1AP6 — Identification
ParameterValue
Product designationnon-fused motor starter 3RA2
Main circuit poles3
BrandSIRIUS
Load feeder sizeS00
Product design / constructiondirect starter
Circuit-breaker sizeS00
Included contactor (type)3RT2015-1AP61
Included circuit-breaker (type)3RV2011-1GA15
Included link module (type)3RA1921-1DA00

Ratings & Performance

3RA2115-1GD15-1AP6 — Ratings & Performance
ParameterValue
Rated motor power at 400 V2 200 W
Operational current Ie, AC-3 at 400 V4.9 A
Rated voltage at AC-3, max.690 V
Rated motor power at 460/480 V (hp)3 hp
Rated motor power at 575/600 V (hp)5 hp
Rated current at 480 V4.8 A
Rated current at 600 V6.1 A
Rated operating frequency50 ... 60 Hz
Rated impulse withstand voltage (Uimp)6 kV
Rated insulation voltage Ui (AC, pollution degree 3)690 V
Mechanical service life, typ. (switching cycles)30 000 000

Protection & Tripping

3RA2115-1GD15-1AP6 — Protection & Tripping
ParameterValue
Trip classCLASS 10
Short-circuit protectionYes
Rated short-circuit current at 400 V (IEC 60947-4-1)153 000 A
Overload release setting range (current)4.5 ... 6.3 A
Overload release typethermal (bimetallic)
Short-circuit trip typemagnetic
Duty / utilization type (IEC 60947-6-2)1

Contacts & Control

3RA2115-1GD15-1AP6 — Contacts & Control
ParameterValue
Rated value690 V
Rated voltage range at 50 Hz187 ... 242 V
Auxiliary contacts, NO2
Auxiliary contacts, NC1
Auxiliary switch extensionYes
Switching contact typeelectromechanical

Mechanical & Connection

3RA2115-1GD15-1AP6 — Mechanical & Connection
ParameterValue
Main circuit connection typescrew-type terminals
Main contact conductor range (AWG)2x (20 ... 16), only for contactor 2x (18 ... 14), 2x 12
Mounting / fastening methodfor snapping onto 60 mm busbar systems
Mounting positionvertical
Width45 mm
Height200 mm
Depth155.1 mm

Environmental

3RA2115-1GD15-1AP6 — Environmental
ParameterValue
Operating temperature range-20 ... +60 °C
Storage temperature range-50 ... +80 °C
Transport temperature range-55 ... +80 °C
Pollution degree3
Shock resistance (IEC 60068-2-27)6g / 11 ms

Product details

SIRIUS size S00 direct starter — what ships in the box

The 3RA2115-1GD15-1AP6 is a Siemens SIRIUS non-fused motor starter, size S00, configured as a direct starter. It ships as a complete assembly: the supplied contactor is a 3RT2015-1AP61 and the link module is a 3RA1921-1DA00 — no separate ordering of subcomponents for the basic build. The overload release is thermal bimetallic, Class 10 trip characteristic — it tracks motor heating for standard start applications without nuisance tripping on normal acceleration. Type of assignment 1 means coordination with the upstream short-circuit protective device is verified for the starter itself, not for downstream loads.

Motor ratings across the voltage range

At 575/600 V the starter handles 5 hp; at 460/480 V it's rated 3 hp; at 220/230 V it's 1.5 hp. The AC-3 maximum operating voltage is 690 V, matching the rated insulation voltage of 690 V — the starter is not voltage-limited by the contactor in standard motor switching duty. At 400 V the power rating is 2,200 W; at 500 V it's 3,000 W. The coil supply is tapped from the control circuit: 187–242 V at 50 Hz, 192–264 V at 60 Hz — a dual-frequency coil that covers common control voltages across regions without a transformer tap change.

Panel fit and mounting constraints

Width is 45 mm, height 200 mm, depth 155.1 mm — the S00 footprint fits a standard 45 mm-wide DIN-rail slot. The fastening method is for snapping onto 60 mm busbar systems, not direct DIN-rail clipping; mounting position is vertical only. Clearance requirements: 20 mm upwards, 10 mm downwards, 9 mm at the side, 0 mm forwards and backwards. Pollution degree 3 means the starter is rated for industrial environments where conductive dust or condensation may be present — no additional conformal coating needed for typical panel conditions. Operating temperature range is -20 to +60 °C; storage range -50 to +80 °C; transport range -55 to +80 °C.

Lifecycle and sourcing — active, quoted to order

Pricing and availability are confirmed at quote time per the RFQ quantity. The starter is not a stock-holding item on this desk; it is quoted to order with lead time and volume pricing provided on request.

Frequently asked questions

What is the trip class and overload type on this starter?

Trip Class 10 with a thermal bimetallic overload release. The bimetallic design is field-adjustable and requires no auxiliary power to operate.

What are the clearance requirements around this starter in the panel?

Minimum clearances: 20 mm above, 10 mm below, 9 mm at the sides, 0 mm front and back. The 0 mm front/back clearance means the starter can be mounted flush against the panel door or backplate as long as the busbar snap-on is accessible. Mounting position is vertical only.

MPN
3RA2115-1GD15-1AP6