0.63 A reversing starter, S00 frame, snap-on busbar mount
The 3RA2210-0GS15-2BB4: This is a factory-assembled unit: it ships with the 3RT2015-2BB42 contactor, the 3RA2911-2AA00 link module, and the 8US1251-5DS11 busbar adapter — all matched for the S00 frame. The main circuit uses spring-loaded terminals, so no screw torque check on the power wires; the control circuit termination type isn't listed here, but the contactor's own terminals are likely screw or spring depending on the variant.
Snap-on for 60 mm busbar, vertical only
Mounting is by snapping onto 60 mm busbar systems — the same footprint as the SIRIUS S00 contactor and breaker range. Mounting position is vertical only; the unit is 155 mm deep, 90 mm wide, 230 mm tall. Clearance: 50 mm above, 32 mm in front, 10 mm at the sides, 10 mm below — zero behind. That 32 mm forward clearance is the tightest dimension; if the panel door or busbar cover is closer, the starter won't fit. The ambient operating range is -20 to +60 °C, with storage and transport from -50 to +80 °C.