SIRIUS reversing starter, S00 frame, 0.8 A AC-3
The 3RA2210-0HH15-2AP0: It ships as a factory-assembled unit with a 3RT2015-2AP02 contactor and a 3RA2911-2AA00 link module, so the reversing interlock and mechanical linkage are already set — no field wiring between contactors.
Snap-on busbar mounting, spring terminals
Designed for snapping onto 60 mm busbar systems — the mounting position is vertical, and the fastening method is a snap-on clip, not DIN rail. This is a panel-builder detail: if your panel uses 60 mm busbars for power distribution, this starter clips directly onto them without a separate mounting plate. Main circuit connections are spring-loaded terminals — no screw torque to verify, just strip and push. The supplied contactor uses the same spring-clamp technology on the coil terminals. Dimensions are 155 mm deep, 90 mm wide, 260 mm tall — the S00 frame is the smallest Siemens load feeder size, so it fits in tight panel sections. Clearance requirements: 50 mm upwards, 32 mm forwards, 10 mm downwards, 10 mm at the side, 0 mm backwards.
Sourced through authorized distribution channels. Operating temperature range is -20 to +60 °C, storage and transport range is -50 to +80 °C — suitable for most industrial environments including non-conditioned warehouses.