Reversing starter, size S00 — what ships in the box
The 3RA2210-0KA15-2AP6 is a Siemens SIRIUS non-fused reversing motor starter, size S00, that ships as a pre-assembled unit with the contactor (3RT2015-1AP62) and link module (3RA1921-1DA00) already matched — no separate ordering of components for the reversing pair. Rated for AC-3 switching up to 690 V, the starter delivers 370 W at 400 V, 550 W at 500 V, and 750 W at 690 V — the horsepower equivalents are 0.5 hp at both 460/480 V and 575/600 V.
Trip class 10 and thermal-magnetic protection
The overload release is thermal bimetallic (Class 10), and the short-circuit trip is magnetic — this combination gives motor protection that tracks the heating curve of the winding during start-up while clearing hard faults magnetically. At 480 V the full-load current rating is 1.19 A; at 600 V it is 1.25 A — these are the values to set on the overload dial for the connected motor nameplate.
Panel fit — 90 mm wide, 170 mm tall, 97.1 mm deep
Mounting is snap-on to DIN rail or screw-mount with an additional push-in lug; the mounting position is vertical, and the clearance requirements are 20 mm upwards, 10 mm downwards, and 9 mm at the side — no clearance needed forwards or backwards.