Reversing starter in S00 frame — what it packs
The 3RA2210-1BD15-2AK6: This is a Siemens SIRIUS non-fused reversing starter, size S00, designed for snapping onto 60 mm busbar systems. It ships as a pre-assembled unit containing the contactor 3RT2015-1AK62, the link module 3RA1921-1DA00, and the busbar adapter 8US1251-5DS10 — one order code, one line item on the BOM.
Rated power and current — what drives the selection
At 400 V AC-3 duty the starter is rated 750 W; at 690 V AC-3 the rating is 1 100 W. The maximum rated operational voltage is 690 V, so this unit covers 400 V and 690 V motor circuits without derating the switching capability. Current ratings at 480 V and 600 V are 1.63 A and 1.72 A respectively — useful for sizing the upstream protection and confirming coordination with the motor full-load amps.
Mounting and panel fit
The starter snaps directly onto 60 mm busbar systems — no separate mounting plate needed. Dimensions are 155.1 mm deep, 90 mm wide, 200 mm tall. Clearance requirements: 20 mm upwards, 10 mm downwards, 9 mm at the side, zero forwards or backwards. Mounting position is vertical only; the operating temperature range is -20 to +60 °C, with storage and transport limits of -50 to +80 °C.
Lifecycle and sourcing posture
The supplied contactor (3RT2015-1AK62) and busbar adapter (8US1251-5DS10) are also active line items, so the entire assembly is supportable for new builds and MRO spares alike.