SIRIUS reversing starter, size S00 — 2 A AC-3 at 400 V
The 3RA2210-1BH15-2BB4: Trip Class 10 protection matches standard motor start profiles — the overload element opens on a sustained overcurrent before the motor windings overheat. Control coil is 24 V DC — the same voltage as most PLC output cards, so it wires straight out of the digital output module without a separate interface relay.
Snap-on busbar mounting and spring terminals
Snaps directly onto 60 mm busbar systems — no DIN rail adapter needed, and the vertical mounting position keeps the contactor arc chambers oriented correctly for arc extinction. Main circuit connections are spring-loaded terminals — strip the wire, push it in, no screw torque to check. The control circuit uses the same spring clamp, so all terminations are consistent across the starter. Overall dimensions are 155 mm deep, 90 mm wide, 260 mm tall — the 90 mm width is about 5 DIN modules, so plan the panel layout accordingly.
RoHS compliance date of October 1, 2009 is on file — the part meets EU substance restrictions for current builds.