Reversing starter for 60 mm busbar systems
The Siemens 3RA2210-1GD15-2AP0 is a SIRIUS reversing starter in Size S00, designed to snap directly onto 60 mm busbar systems — no DIN rail adapter needed. It ships as a pre-assembled unit with the 3RT2015-1AP02 contactor and 3RA1921-1DA00 link module, saving panel build time on reversing motor circuits.
Trip class and motor ratings
At 400 V the starter handles 2.2 kW; at 480 V it's rated 4.8 A, and at 600 V it carries 6.1 A. The 690 V rated insulation voltage gives headroom for 480/600 V systems without derating.
Mounting and clearances
Mounting position is vertical only. Minimum clearances: 50 mm above, 32 mm in front, 10 mm below, 10 mm at the sides, and zero clearance behind. The 155 mm depth, 90 mm width, and 204 mm height fit a standard 600 mm deep enclosure with room for gland plates and wiring ducts.
Operating environment and storage
Rated for -20 to +60 °C during operation with temperature compensation active across the same range. Storage and transport tolerance extends from -50 to +80 °C, so the starter can sit on a cold warehouse shelf or ship through a winter route without damage.
Production status and sourcing
Compliance documentation (RoHS, REACH, UL, IEC) is available with the shipment.