SIRIUS S00 reversing starter — 6.5 A AC-3 at 400 V
The 3RA2210-1HD16-2BB4: The 24 V DC coil holds at 4 W, so the control transformer and wiring need only that holding power once picked.
Supplied components — contactor, circuit-breaker, link module
The reversing starter ships as a factory-coordinated set: the supplied contactor is 3RT2016-1BB42, the supplied circuit-breaker is 3RV2011-1HA10, and the link module is 3RA1921-1DA00. This means the short-circuit protection and overload coordination are already matched — no separate selectivity calculation needed between the contactor and the breaker, provided the downstream motor full-load current falls within the breaker's setting range.
Mounting — snaps onto 60 mm busbar systems
The fastening method is for snapping onto 60 mm busbar systems — the design of the product is specifically for 60 mm busbars, so it mounts directly without an adapter plate. The mounting position is vertical; the dimensions are 156 mm deep, 90 mm wide, and 200 mm high, with clearances of 50 mm upwards, 32 mm forwards, 10 mm downwards, and 10 mm at the side. Backwards clearance is 0 mm, meaning it can sit flush against a back panel. Operating temperature range is -20 to +60 °C; storage and transport range is -50 to +80 °C.
The RoHS substance prohibitance date is 10/01/2009, so the part is RoHS-compliant for current builds.