Reversing starter for tight panels
The 3RA2215-0HA15-2AP6: This is a Siemens SIRIUS 3RA2 non-fused reversing motor starter — a pre-assembled unit that combines a contactor, thermal overload relay, and short-circuit protection in one size S00 package. It's built for controlling reversing motor loads like conveyors, hoists, or valve actuators where you need forward/reverse switching without separate component wiring. Rated 180 W at 400 V and 370 W at 690 V, with a 50/60 Hz operating range. Snaps onto DIN rail or screws down with the included push-in lug. Mounting is vertical only — horizontal mounting changes the thermal behavior and voids the overload calibration. Dimensions: 170 mm tall, 90 mm wide, 97.1 mm deep, with 20 mm clearance needed above and 10 mm below for airflow and wiring.
What's inside the box — supplied components
The starter ships as a complete assembly: a 3RT2015-1AP62 contactor, a 3RA1921-1DA00 link module, and a 3RV2011-0HA15 circuit-breaker. That means the overload relay and magnetic short-circuit trip are already wired and coordinated — no guessing on the trip curve match. The contactor is electromechanical, the overload is thermal bimetallic, and the short-circuit trip is magnetic. Pollution degree 3 rated — fine for industrial control panels where dust and conductive deposits are present. AWG equivalents: 2x 20–16, or 2x 18–14, or 2x 12. The auxiliary switch extension is available (product extension auxiliary switch: Yes) if you need feedback to the PLC.
Active production — sourcing this exact code
No stock-holding claim — sourced per RFQ.