Form factor and panel fit — S00 reversing starter on 60 mm busbar
The 3RA2215-1BD15-2AP6 is a SIRIUS size S00 reversing motor starter — 200 mm tall, 90 mm wide, 155.1 mm deep — designed to snap directly onto a 60 mm busbar system, not a DIN rail. Mounting is vertical only; the enclosure requires 20 mm clearance upward and 10 mm downward, with 9 mm side clearance for airflow and wiring access. The unit ships as a pre-assembled reversing combination: the supplied contactor (3RT2015-1AP62), link module (3RA1921-1DA00), and busbar adapter (8US1251-5DS10) are included, so no separate ordering of sub-components for the reversing function.
Motor ratings and trip class — what the 750 W at 400 V means for your load
At 480 V the full-load current rating is 1.63 A; at 600 V it is 1.72 A. The control coil is rated for 187–242 V at 50 Hz and 192–264 V at 60 Hz — a wide-range coil that covers 200–240 V line voltages across both mains frequencies without a tap change.
Wire termination and environmental limits
Operates from -20 to +60 °C ambient; storage range -50 to +80 °C; transport range -55 to +80 °C. Pollution degree 3 (conductive pollution or dry non-conductive that becomes conductive due to condensation — typical in industrial control cabinets without climate control).
Lifecycle and sourcing — active, quoted to order
No stock-holding claim is made — each RFQ is handled individually.