What ships inside the assembly
The 3RA2324-8XB30-2AC2: This SIRIUS reversing contactor assembly comes with two 3RT2024-2AC20 contactors pre-configured for forward and reverse direction switching — one per rotation direction, with one auxiliary contact each. At 480 V and 600 V the current rating holds at 11 A. The 24 V AC/DC coil (50/60 Hz) keeps control voltage within standard PLC output ranges — no separate transformer needed for a 24 VDC control bus.
Mounting and termination for panel builders
Mounts on 35 mm standard DIN rail with screw and snap-on fastening. The S0 frame (90 mm wide, 114 mm tall, 97 mm deep) fits a standard motor starter slot in a control panel. Clearance requirements: 6 mm above, below, and to the sides; zero clearance behind. The magnet coil terminates on spring-type terminals as well — no screw torque checks on either circuit.
Lifecycle and sourcing posture
The assembly is built from two standard 3RT2024 contactors, so replacement contactors and spare parts remain widely available through the SIRIUS platform.