Skip to main content
Siemens 3RA2813-2FW10 — Motor Starters

Siemens 3RA2813-2FW10 SIRIUS Motor Starter, ON-Delay, 3 A

MPN3RA2813-2FW10
Active

Siemens SIRIUS 3RA2813-2FW10 motor starter, ON-delay function, 3 A maximum rated current, adjustable time 0.05... 100 s, clip-on mounting, 45 x 38 x 74 mm.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

3RA2813-2FW10 — Identification
ParameterValue
Product designationSolid-state time-delay auxiliary switch
BrandSIRIUS
Reference designation (IEC 81346-2)K
3RA2813-2FW10 — Ratings & Performance
ParameterValue
Rated impulse withstand voltage (Uimp)4 kV
3RA2813-2FW10 — Contacts & Control
ParameterValue
Control supply voltage typeAC/DC
3RA2813-2FW10 — Mechanical & Connection
ParameterValue
Mounting / fastening methodclip-on
Mounting positionany (like contactor)
Width45 mm
Height38 mm
Depth74 mm
3RA2813-2FW10 — Environmental
ParameterValue
Operating temperature range-25 ... +60 °C
Storage temperature range-40 ... +85 °C
Transport temperature range-40 ... +85 °C
Pollution degree3
Shock resistance (IEC 60068-2-27)15g / 11 ms

Product details

ON-delay timing and the 3 A current ceiling

The 3RA2813-2FW10: This SIRIUS motor starter integrates an ON-delay function with an adjustable time range from 0.05 to 100 s — set via the front dial. The 3 A maximum rating at AC/DC supply voltage (24... 240 V AC/DC) defines the load it can switch directly; for higher-current motor circuits, the 3RA28 feeds a contactor coil rather than handling the main motor current. Rated for basic insulation, pollution degree 3 environment, and an operating temperature range of -25 to +60 °C — suited to industrial panels where dust and humidity are present.

Clip-on mounting and panel footprint

Snaps onto DIN rail via its clip-on fastening method — no screws needed. The 45 mm width and 38 mm height fit a standard 1-module slot; depth is 74 mm, leaving clearance for wiring in shallow enclosures. Mounting position is any orientation like a contactor, which simplifies layout in dense panels.

Wiring and auxiliary contact ratings

Wire range accepts solid and stranded conductors from 20 to 14 AWG.

Frequently asked questions

What is the adjustable time range for the ON-delay?

The ON-delay is adjustable from 0.05 to 100 seconds, set by the front dial. Recovery time between cycles is 150 ms.

What wire sizes does the 3RA2813-2FW10 accept?

Solid and stranded conductors from 20 AWG up to 14 AWG. The terminal screws accommodate this range without adapter ferrules.

MPN
3RA2813-2FW10