Skip to main content
Siemens 3RB3026-2QE0 — Overload Relays

Siemens 3RB3026-2QE0 SIRIUS Solid-State Overload Relay

MPN3RB3026-2QE0
Active

Siemens SIRIUS 3RB3026-2QE0 solid-state overload relay, Size S0, 25 A thermal current, Trip Class 20E, 690 V rated, spring-loaded terminals, integrated auxiliary contact.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

3RB3026-2QE0 — Identification
ParameterValue
Product brand nameSIRIUS
Product designationsolid-state overload relay
Frame size (overload relay)S0
Combinable contactor sizesS0
Reference code (IEC 81346-2)F
3RB3026-2QE0 — Protection & Trip
ParameterValue
Overload current setting range6 ... 25 A
Trip classCLASS 20E
Overload release typeelectronic
3RB3026-2QE0 — Electrical (main circuit)
ParameterValue
Rated operational current25 A
Poles (main circuit)3
Rated operating frequency50 ... 60 Hz
Rated insulation voltage (AC, pollution degree 3)690 V
Rated value (AC-3e), max.690 V
Rated surge withstand voltage6 kV
Main current circuitspring-loaded terminals
Power loss at rated current (hot)1.7 W
Per pole0.57 W
3RB3026-2QE0 — Auxiliary contacts
ParameterValue
Auxiliary contacts: NO1
Auxiliary contacts: NC1
Auxiliary contacts: CO (changeover)0
Auxiliary switch short-circuit protection (required fuse)fuse gG: 6 A
Switching current at 24 V2 A
Switching current at 60 V0.55 A
Switching current at 110 V0.3 A
Switching current at 120 V4 A
Switching current at 125 V0.3 A
Switching current at 220 V0.11 A
Switching current at 230 V3 A
3RB3026-2QE0 — Connection & Mounting
ParameterValue
Mounting / fastening methodContactor mounting
Mounting positionany
Main-circuit connector arrangementTop and bottom
Auxiliary/control circuit connection typespring-loaded terminals
Removable aux./control terminalYes
Conductor cross-section: solid2x (0.25 ... 1.5 mm²)
Conductor cross-section: solid or stranded2x (0,25 ... 1,5 mm²)
Conductor cross-section: finely stranded with ferrule2x (0.25 ... 1.5 mm²)
3RB3026-2QE0 — Environmental
ParameterValue
Operating temperature-25 ... +60 °C
Storage temperature-40 ... +80 °C
Transport temperature-40 ... +80 °C
Relative humidity, operating10 ... 95 %
Max. installation altitude2 000 m
Shock resistance15g / 11 ms
3RB3026-2QE0 — Mechanical
ParameterValue
Width45 mm
Height109 mm
Depth85 mm

Product details

Solid-state trip with a message output — not just a contact

The 3RB3026-2QE0 is a SIRIUS solid-state overload relay that signals a trip condition via a dedicated message output — the note field reads 'for message tripped'. Unlike a bimetallic relay that only opens its NC contact, this relay gives the PLC or HMI a direct trip-annunciation path through the 97/98 signaling contact. Trip Class 20E means the relay allows up to 20 seconds to trip at 7.2× the full-load current setting. This suits high-inertia loads like conveyors, centrifuges, or large fans where the starting transient would nuisance-trip a faster class.

Current rating and voltage independence

Continuous thermal current is 25 A, and the relay holds that same 25 A rating at both 480 V and 600 V. The maximum rated voltage is 690 V, so the relay does not derate across the 480–600 V range — useful for panels that feed both 480 V and 600 V motor branches. Power dissipation per pole is 0.57 W, so three poles running at full current dissipate about 1.7 W total — negligible for the enclosure thermal budget.

Auxiliary contact ratings across control voltages

The integrated signaling contact (97/98) is rated 4 A at 120 V and 3 A at 230 V. At 24 V it handles 2 A, and at 125 V it carries 0.3 A. The 60 V rating is 0.55 A, and at 220 V it drops to 0.11 A. These are the make/break capacities for the trip-indication circuit — match the PLC input or pilot-light load to these limits.

Mounting and wiring — Size S0, contactor direct-mount

Size S0 with contactor-mount fastening means this relay clips directly onto a SIRIUS 3RT2 contactor without separate panel wiring for the power circuit. The main circuit uses spring-loaded terminals accepting 1× 10 mm² stranded or 2× 0.25–1.5 mm² solid. Dimensions are 45 mm wide, 109 mm high, 85 mm deep.

Storage and transport range is -40 to +80 °C. Shock resistance is 15 g / 11 ms, and vibration resistance follows 1–6 Hz at 15 mm amplitude, 6–500 Hz at 20 m/s², 10 cycles. Substance prohibitance date is 10/01/2009, confirming RoHS compliance.

No stock-holding claim — quantities are confirmed per inquiry.

Frequently asked questions

What does the note 'for message tripped' mean on this relay?

The note indicates the relay is designed to signal a trip condition via a dedicated message output — the 97/98 signaling contact closes or opens to tell the PLC or HMI that the overload has tripped, rather than just interrupting the contactor coil circuit.

What is the closest functional second-source for 3RB3026-2QE0?

The peer MPNs listed (6ES7214-1BG40-0XB0, 6ED1052-1MD08-0BA1, 6AG1052-2FB08-7BA1) are from different Siemens product families — a PLC, a logic module, and a SIPLUS variant — not overload relays.

How do I get current pricing and availability for 3RB3026-2QE0?

Submit an RFQ through the storefront. The relay is sourced through independent distribution channels.

MPN
3RB3026-2QE0