The Siemens SIRIUS 3RH1122-2AP00-0TK0 is a size S00 auxiliary contactor with 2 normally-open instantaneous contacts, rated for a maximum operational current of 10 A in AC-12 duty at 24 V. It mounts via screw or snap-on to a DIN rail, occupying 45 mm width in the panel — standard for the S00 footprint. The front face is IP20 rated, suitable for enclosed control cabinets where finger-safe touch protection is needed during maintenance access.
Mounting and integration
Snap-on or screw-fix to a 35 mm DIN rail. Mounting position is flexible: ±180° rotation on a vertical surface, plus ±22.5° tilt forward/backward — useful when fitting into tight gland-plate layouts or angled sub-panels. Clearance at the side is 0 mm, so units can be ganged without spacing. Wire termination accepts solid or ferruled stranded conductors from 0.25 to 2.5 mm² — covers standard control wiring for 24 VDC or 230 VAC pilot circuits. Depth behind the panel is 73 mm, which fits most standard enclosure depths without crowding the backplane.
Ratings and duty
Rated operational current varies by voltage and duty: 10 A at 24 V (AC-12), 6 A at 230 V, 3 A at 400 V, 2 A at 500 V, and 1 A at 690 V. For DC switching at 110 V it carries 1 A, dropping to 0.27 A at 220 V. These are the contact ratings for auxiliary loads — signal lamps, contactor coils, PLC inputs — not motor power. The contacts are rated for 50 Hz and 60 Hz operation with a voltage range of 0.8 to 1.1 times rated value at both frequencies. Mechanical endurance is typical 30 million operating cycles — this is a high-life auxiliary block meant for frequent switching in cyclic machines or conveyor lines. Shock resistance is 10g at 5 ms and 5g at 10 ms, adequate for industrial environments with moderate vibration from adjacent contactors or drives.