It provides 3 normally open (instantaneous) and 1 normally closed contact, with no leading, lagging, delayed, or make-before-break switching — a straightforward standard-contact block. Rated for 10 A at 24 V, 6 A at 230 V, and 3 A at 400 V, this contactor handles typical 24 VDC control loads and higher-voltage pilot circuits.
Mounts via screw or snap-on onto a DIN rail; the size S00 frame (45 mm wide, 57.5 mm tall, 72 mm deep) fits standard panel layouts. Terminals accept solid conductors: 2x (0.5...1.5 mm²), 2x (0.75...2.5 mm²), and 2x 4 mm². The product extension for auxiliary switches is supported, allowing additional contact blocks to be snapped on if more I/O is needed later.
Substance prohibition date is 07/01/2006. No UL or CSA marks appear in the evidence; verify local code acceptance if your jurisdiction requires them.