It's rated 10 A at 24 V, 6 A at 230 V, and 3 A at 400 V — those are the continuous thermal currents (Ith) for the contacts, so the real load determines which voltage/current pair governs your circuit. The varistor surge suppressor is built in, which saves adding a separate snubber on the coil.
Mounting and fit
Width is 45 mm, height 57.5 mm, depth 72 mm — that's the S00 footprint, which drops onto a DIN rail or screws directly to a backplate. The fastening method is screw and snap-on mounting, so you can clip it onto the rail without tools or bolt it down if vibration is a concern.
Switching and reliability
The mechanical life of the contactor is 30 million operations typical. Shock resistance is 10 g for 5 ms and 5 g for 10 ms, which covers most industrial vibration environments.
Wiring and compliance
Solid wire sizes accepted: 2x (0.5 to 1.5 mm²), 2x (0.75 to 2.5 mm²), and 2x 4 mm². That's the terminal capacity for the auxiliary contacts — two wires per clamp up to 4 mm², which is typical for control wiring. IP20 on the front protects against finger contact.