It carries four normally-open instantaneous contacts rated 10 A at AC-12 (resistive load), which is the standard rating for control-circuit duty — switching PLC outputs, pilot lights, or smaller contactor coils.
For inductive loads at higher voltages, the rated current drops: 6 A at 230 V AC-15 (typical for solenoid valves), 3 A at 400 V, and 1 A at 690 V — so if you're switching a 400 V contactor coil, you're limited to 3 A per contact.
Screw and snap-on mounting onto a DIN rail. Dimensions: 45 mm wide, 60 mm tall, 73 mm deep. The 73 mm depth is the body plus terminals — check clearance to the cabinet door or busbars behind. Terminals accept solid or stranded wire 0.25 to 2.5 mm² (2 x 2.5 mm² per clamp). Front face is IP20 — safe for finger contact, but not washdown.