It carries four normally-open (NO) instantaneous contacts, rated 10 A at AC-12 (resistive loads at 50/60 Hz), and 10 A at 24 V DC — enough to handle most pilot-duty and signal-level switching in a 24 VDC control loop, though the DC rating drops sharply at higher voltages (1 A at 110 V, 0.27 A at 220 V).
Mounts via screw or snap-on to DIN rail. S00 footprint is 45 mm wide, 57.5 mm tall, 111 mm deep. Terminals accept solid or ferruled stranded wire: 2x (0.5 to 1.5 mm²), 2x (0.75 to 2.5 mm²), or 2x 4 mm² — the dual-wire capacity is useful for daisy-chaining common signals without an extra terminal block.
Environmental and life ratings
Shock-rated at 10g / 5 ms and 5g / 10 ms — tough enough for machine-tool cabinets and conveyor lines, not for direct mounting on a vibrating pump skid without isolation.