It provides four normally open (NO) instantaneous contacts and is rated for a mechanical endurance of 10,000,000 operating cycles.
The contactor's rated operational current varies with voltage and frequency: 10 A at 24 V, 6 A at 230 V, 3 A at 400 V, and 1 A at 690 V. At 50 Hz the rated operational current range is 0.8 to 1.1 A; at 60 Hz it is 0.85 to 1.1 A. These values define the continuous current the contacts can carry and interrupt under normal conditions — a 10 A rating at 24 V covers most PLC output and relay coil loads, while the 1 A at 690 V accommodates higher-voltage control circuits in 690 V line-fed panels.
The 45 mm wide, 60 mm tall, 114 mm deep footprint fits the standard S00 contactor slot on a DIN rail. Fastening is by screw and snap-on mounting.
Environmental and surge protection
Shock resistance is 10 g / 5 ms and 5 g / 10 ms, which covers most industrial vibration environments short of direct hammer-mill mounting. The built-in surge suppressor uses a varistor, so no external RC snubber is needed for coil suppression on AC control circuits — a detail that saves panel space and wiring time.