It carries a 24 V DC coil, with a closing and holding power of 3.2 W — a steady-state draw that a standard 24 V DC power supply handles without issue.
Terminal capacity and contact configuration
The terminal block accepts solid conductors: 2x (0.5 to 1.5 mm²), 2x (0.75 to 2.5 mm²), and 2x 4 mm². That covers most control wiring gauges you'd run in a panel — no need for ferrule adapters on the 4 mm² runs. The contact arrangement provides 6 instantaneous contacts (NO/NC configurable per the base device), with no leading, lagging, delayed, or make-before-break switching options on this variant. For a straightforward interlock or feedback circuit, that's sufficient; if you need sequenced contact timing, you'd look at the optional auxiliary switch block (not included here).
Shock resistance is rated at 10g for 5 ms and 5g for 10 ms.