The six normally open instantaneous contacts are rated 10 A at 24 V, with a break capacity that derates to 6 A at 230 V and 1 A at 690 V, covering the range of typical PLC output loads, relay coils, and indicator lamps.
The 45 mm width and 60 mm height match the S00 footprint — a standard slot in most Siemens motor-starter assemblies. Depth is 114 mm, which includes the coil terminals and contact block overhang; verify clearance behind the rail before wiring.
Each auxiliary contact terminal accepts two conductors from 0.25 to 2.5 mm² solid or stranded (24 to 14 AWG). The dual-wire capacity is useful for daisy-chaining signals without a separate terminal block. The screw terminals are standard for the SIRIUS family — no special tooling needed.
Environmental and electrical endurance
Rated for pollution degree 3 (conductive or dry non-conductive pollution), so it suits industrial environments where dust, moisture, or conductive deposits are present. Shock resistance is 10g at 5 ms and 5g at 10 ms, adequate for panel-mounted equipment on machinery with moderate vibration. Contact reliability is specified as one incorrect switching operation per 100 million at 17 V, 1 mA — a low-level signal rating that matters for PLC inputs and dry-contact circuits.