It carries a 24 V DC coil with a holding power of 3.2 W and is rated for 10 A at 24 V, stepping down to 1 A at 690 V — so the thermal rating follows the voltage curve, not a fixed ampacity. The contact configuration gives you 2 normally open instantaneous contacts, no delayed or lagging switching, which means it's a straight on/off auxiliary block for feedback, interlocks, or PLC input isolation.
Mounts via screw and snap-on to a DIN rail. The S00 footprint is compact at 90 mm wide, 57.5 mm tall, and 72 mm deep — it fits standard 35 mm rail with room for adjacent contactor stacks. Screw terminals accept solid conductors: 2x 0.5–1.5 mm², 2x 0.75–2.5 mm², or 2x 4 mm².
The coil draws 3.2 W both on closing and holding, so there's no inrush spike to size a power supply around — steady-state load. Shock resistance is 10g for 5 ms and 5g for 10 ms, adequate for most industrial panel environments.