Skip to main content
Siemens 3RH1431-1AF00 — Contactors

Siemens SIRIUS 3RH1431-1AF00 Auxiliary Contactor, 3 NO + 1 N

MPN3RH1431-1AF00

Siemens SIRIUS auxiliary contactor, size S00, 3 NO + 1 NC, screw terminals, 10 A AC-12, 24 VDC rated 10 A, 72 mm depth, 90 mm width, 57.5 mm height.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

3RH1431-1AF00 — Identification
ParameterValue
Contactor frame sizeS00
3RH1431-1AF00 — Ratings & Performance
ParameterValue
Rated operational current, AC-12, max.10 A
Rated value @ 24 V10 A
Rated value @ 110 V1 A
Rated value @ 220 V0.27 A
3RH1431-1AF00 — Control & Coil
ParameterValue
Control supply voltage typeAC
Rated value @ 50 Hz0.8 ... 1.1
Rated value @ 50 Hz110 V
3RH1431-1AF00 — Contacts & Poles
ParameterValue
Auxiliary contact reliability1 faulty switching per 100 million (17 V, 1 mA)
3RH1431-1AF00 — Protection & Coordination
ParameterValue
Aux. switch short-circuit protection, fusefuse gL/gG: 10 A
3RH1431-1AF00 — Connection & Mounting
ParameterValue
Aux. / control circuit connectionscrew-type terminals
Conductor cross-section, solid2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²), 2x 4 mm²
Conductor cross-section, finely stranded w/ ferrule2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²)
Mounting methodscrew and snap-on mounting
3RH1431-1AF00 — Durability
ParameterValue
Durability (operating cycles, typ.)5 000 000
Durability with aux. switch block (cycles, typ.)5 000 000
3RH1431-1AF00 — Environmental
ParameterValue
Operating temperature range-25 ... +60 °C
Storage temperature range-55 ... +80 °C
Installation altitude, max.2 000 m
3RH1431-1AF00 — Mechanical
ParameterValue
Width90 mm
Height57.5 mm
Depth72 mm

Product details

The AC-12 operational current is rated at 10 A maximum — that's the resistive-load switching capacity at line voltage, so it handles pilot-duty loads like contactor coils, relays, and indicator lamps up to that current. At 24 VDC the contact rating is also 10 A, which covers most PLC output and DC control circuits. For 110 VAC the rating drops to 1 A, and at 220 VAC it's 0.27 A — the DC and higher-voltage derating is typical for silver-alloy contacts; if you're switching inductive DC loads below 24 V, verify the make/break current against the published curve.

Frequently asked questions

What is the depth of 3RH1431-1AF00?

The depth is 72 mm.

What wire sizes does the screw terminal accept?

The solid conductor capacity is 2x (0.5... 1.5 mm²), 2x (0.75... 2.5 mm²), and 2x 4 mm².

MPN
3RH1431-1AF00