It mounts via snap-on fastening onto a DIN rail, occupying a width of 36.5 mm, depth of 41.5 mm, and height of 37.5 mm. The screw-type terminals accept 2x (0.5 to 1.5 mm²) and 2x (0.75 to 2.5 mm²) conductors with core-end processing, or 2x (20 to 16) and 2x (18 to 14) AWG for auxiliary circuits.
Rated operational currents — what the voltages mean
The maximum continuous current is 10 A, but the actual rating depends on the circuit voltage and duty. At 24 V AC/DC the switch block carries 6 A; at 125 V it carries 6 A; at 230 V it carries 6 A; at 400 V it carries 3 A. For DC switching at higher voltages, the ratings drop significantly: 2 A at 60 V, 1 A at 110 V, and 0.3 A at 220 V — reflecting the arc-extinction limits of the 2 NC contact set. The AC-15 rated operational current at 690 V is 1 A, which is the figure to use when switching inductive loads (solenoids, contactor coils) at that voltage level.
Lifecycle status and sourcing reality
This order code is a phased-out product per the manufacturer's listing. The official successor is the SIRIUS 3RH2 series. The 3RH2 successor shares the same S00 frame size, screw-terminal format, and snap-on DIN-rail mounting, but verify the contact configuration and terminal layout against your panel design before substituting.
Mechanical and electrical endurance
Environmental and insulation ratings
The front face carries IP20 protection (finger-safe), while the overall unit operates from -25 °C to +60 °C and can be stored from -55 °C to +80 °C. Insulation voltage is rated at 690 V AC with pollution degree 3, and surge voltage resistance is 6 kV — figures that confirm suitability for 400 V line-to-line control panels with adequate clearance and creepage.