Skip to main content
Siemens 3RH2244-4BW40 — Contactors

Siemens 3RH2244-4BW40 SIRIUS Auxiliary Contactor, 4 NO

MPN3RH2244-4BW40

Siemens SIRIUS 3RH2244-4BW40 auxiliary contactor, size S00, 4 NO instantaneous contacts, 48 VDC coil, screw and snap-on 35 mm DIN rail mounting.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

3RH2244-4BW40 — Identification
ParameterValue
Contactor frame sizeS00
3RH2244-4BW40 — Ratings & Performance
ParameterValue
Rated operational current, AC-12, max.10 A
Rated value @ 400 V3 A
Rated value @ 500 V2 A
Rated value @ 690 V1 A
Rated value @ 230 V6 A
Rated value @ 24 V10 A
Rated value @ 60 V4.7 A
Rated value @ 110 V3 A
Rated value @ 220 V1.2 A
3RH2244-4BW40 — Control & Coil
ParameterValue
Control supply voltage typeDC
3RH2244-4BW40 — Contacts & Poles
ParameterValue
Auxiliary contact reliability1 faulty switching per 100 million (17 V, 1 mA)
3RH2244-4BW40 — Connection & Mounting
ParameterValue
Mounting methodscrew and snap-on mounting onto 35 mm standard mounting rail
3RH2244-4BW40 — Durability
ParameterValue
Durability (operating cycles, typ.)10 000 000
3RH2244-4BW40 — Environmental
ParameterValue
Operating temperature range-25 ... +60 °C
Storage temperature range-55 ... +80 °C
Installation altitude, max.2 000 m
3RH2244-4BW40 — Mechanical
ParameterValue
Width45 mm
Height57.5 mm
Depth117 mm
3RH2244-4BW40 — Specifications
ParameterValue
At AC10 000 1/h

Product details

S00 frame, 4 NO — what the contact configuration buys you

The 3RH2244-4BW40 is a SIRIUS auxiliary contactor in size S00 — the smallest SIRIUS frame, which keeps the panel footprint tight at 45 mm wide by 57.5 mm tall by 117 mm deep. Four normally-open instantaneous contacts give you four independent signal paths that close when the coil picks up. No auxiliary switch block to add — the 4 NO is integral, so the depth stays at 117 mm without a bolt-on extension. Rated control supply voltage is 48 VDC. The coil draws 4 W closing and 4 W holding — a constant-grip DC magnet, not a pulsed economy coil, so the holding power is the same as the pick-up power. Budget the 4 W continuous dissipation in the enclosure thermal calculation.

The contact rating is 10 A at 24 V, which is the highest current on the DC rating table. At 60 V it drops to 4.7 A, at 110 V to 3 A, and at 220 V to 1.2 A. For AC utilization at 230 V the contacts carry 6 A, and at 400 V they carry 3 A.

Mounting, clearance, and environmental limits

These are the free-air spacing requirements for heat dissipation and arc clearance — pack tighter and you risk nuisance tripping or reduced contact life. Pollution degree 3 means it is rated for conductive pollution environments typical of industrial control panels — no additional conformal coating required for normal factory atmospheres.

Lifecycle and sourcing — active, quoted to order

The part is sourced through independent distribution channels. No stock-holding claim is made; each RFQ is handled individually.

Frequently asked questions

What is the closest functional second-source for 3RH2244-4BW40?

The 6ED1052-1MD08-0BA1 is a different product class (a LOGO! module, not a contactor) and is not a functional substitute. The 3RH2244-4BW40 is the Siemens standard part for 4 NO, 48 VDC auxiliary switching in size S00.

What compliance documentation does Siemens provide for 3RH2244-4BW40?

The part carries a RoHS substance prohibition date of 10/01/2009, indicating compliance with the EU RoHS directive. Surge voltage resistance is rated at 6 kV. Pollution degree 3 aligns with IEC 60947-1 requirements for industrial environments. Full CE, UL, and CSA declarations are standard for SIRIUS products but are not individually listed in this record.

MPN
3RH2244-4BW40