Rated for continuous duty across a wide voltage range: 24 V at 10 A, 60 V at 4.7 A, 110 V at 3 A, 220 V at 1.2 A, 230 V at 6 A, 400 V at 3 A, 440 V at 0.5 A, 500 V at 2 A, 600 V at 0.26 A, and 690 V at 1 A. These are the thermal current ratings (Ith) at each voltage — the contactor can switch these currents in resistive or lightly inductive circuits without derating, which is the rating that governs the auxiliary circuit design, not a motor-starting curve. The arcing time sits between 10 and 15 ms at AC, and the contactor can handle up to 10 000 switching operations per hour at DC — a high duty cycle for a size S00 auxiliary block, so it suits rapid-pick applications like packaging lines or pick-and-place cells where the auxiliary contacts cycle faster than the main power contactor.
Panel Integration
Dimensions: 57.5 mm high, 45 mm wide, 117 mm deep. The width is a standard 45 mm — two 22.5 mm modules side by side — so it occupies one 45 mm slot on the DIN rail. That side clearance is tighter than the vertical; in a dense panel, leave a full 6 mm to the adjacent device to avoid arc flash tracking at pollution degree 3. Terminals accept 2x (0.5 to 1.5 mm²), 2x (0.75 to 2.5 mm²), or 2x 4 mm² solid or stranded wire — the larger cross-section is for daisy-chaining the common supply.
Relative humidity minimum 10 %. RoHS compliance date of 10/01/2009.