Coil pulls 24 VDC at 4 W closing power, and the contacts are rated 10 A at 24 V for DC switching — that's the number to size your control circuit by, not the AC ratings. Built-in varistor surge suppression means you don't need to add a separate snubber across the coil; the suppressor is designed in. The S00 footprint — 45 mm wide, 57.5 mm tall, 117 mm deep — fits alongside a contactor of the same frame size, sharing the rail without crowding adjacent devices.
Clearance and mounting position
Minimum clearances around the contactor: 10 mm upwards, 10 mm forwards, 10 mm downwards, and 6 mm at the side. That's the air gap needed for arc extinguishing and heat dissipation — don't crowd it tighter in a dense panel. Mounting position is flexible: ±180° rotation on a vertical surface, and you can tilt it forward or backward by ±22.5° on that same vertical surface.
Rated for operation from -25 to +60 °C, storage from -55 to +80 °C.