Skip to main content
Siemens 3RH2916-1DA11 — Contactors

Siemens 3RH2916-1DA11 SIRIUS Auxiliary Switch, 10 mm wide, s

MPN3RH2916-1DA11

Siemens SIRIUS auxiliary switch, 3RH2916-1DA11, 1 NO + 0 NC, snap-on mounting for S00 contactors, 10 mm wide, 66 mm deep.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

3RH2916-1DA11 — Identification
ParameterValue
Contactor frame sizeS00
3RH2916-1DA11 — Ratings & Performance
ParameterValue
Rated value @ 24 V10 A
Rated value @ 60 V4.7 A
Rated value @ 110 V3 A
Rated value @ 220 V1.2 A
3RH2916-1DA11 — Contacts & Poles
ParameterValue
Auxiliary contact reliability1 faulty switching per 100 million (17 V, 1 mA)
3RH2916-1DA11 — Connection & Mounting
ParameterValue
Conductor cross-section, solid or stranded2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²)
Conductor cross-section, finely stranded w/ ferrule2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²)
Mounting methodsnap-on mounting
3RH2916-1DA11 — Environmental
ParameterValue
Operating temperature range-25 ... +60 °C
Storage temperature range-55 ... +80 °C
3RH2916-1DA11 — Mechanical
ParameterValue
Width10 mm
Height57.4 mm
Depth66 mm

Product details

It adds one normally-open instantaneous contact to the base device, with no normally-closed or delayed contacts on this variant. At 10 mm wide, it occupies minimal DIN-rail space alongside the contactor — a key advantage when packing multiple auxiliaries into a tight panel. The IP20 front protection means it is safe for finger contact inside an enclosed panel but not for exposed washdown areas.

That is the maximum continuous current the contacts can carry in a resistive circuit at that voltage. For inductive or motor-control loads, the switching capacity drops significantly: at 48 V it is rated 2 A, at 110 V it drops to 1 A, and at 220 V it handles 0.3 A. These are the AC-15 / DC-13 style derated values for pilot-duty switching of contactor coils, solenoid valves, and indicator lamps. The rated operational currents at higher voltages follow a similar derating curve: 4.7 A at 60 V, 3 A at 110 V, 1.2 A at 220 V, and 0.26 A at 600 V. For a 690 V AC-15 circuit, the rated current is 1 A. These numbers govern the actual load you can switch, not the thermal rating — use the voltage-specific row, not the 24 V headline, when sizing for a 400 V or 480 V control circuit.

For a critical-spare holding or a BOM freeze, this part is a straightforward line item to quote against an RFQ. The snap-on S00 footprint is shared across the SIRIUS 3RT2 contactor family, so a spare in the cabinet covers multiple contactor sizes in the same frame.

Wiring and integration notes

Terminals accept 2 x (0.5 to 1.5 mm²) solid or 2 x (0.75 to 2.5 mm²) stranded with ferrules, or 2 x (20 to 16) AWG and 2 x (18 to 14) AWG respectively. The spring-cage or screw terminals (depending on variant) are sized for daisy-chaining through the auxiliary block. The mirror contact feature per IEC 60947-4-1 is confirmed for this block when used with 3RT2 contactors — meaning the NC contact cannot be held closed by welded main contacts, a safety requirement for feedback circuits in motor starters. The substance prohibition date of 10/01/2009 indicates RoHS compliance from that date forward.

Frequently asked questions

Will the 3RH2916-1DA11 drop into a panel specified around the 3RH2422-1AB00 without rewiring?

Not without checking the mounting interface. The 3RH2916-1DA11 snaps onto the side of S00-size contactors, while the 3RH2422-1AB00 typically mounts on the front of larger frames. The terminal layout and wiring capacity are similar, but the physical attachment point differs.

What compliance documentation does Siemens provide for the 3RH2916-1DA11?

The part carries a substance prohibition date of 10/01/2009, indicating RoHS compliance from that date. The mirror contact feature is certified to IEC 60947-4-1. Standard Siemens declarations of conformity for CE, UKCA, and EAC are available through the product documentation portal.

MPN
3RH2916-1DA11