BOM / RFQ

Siemens 3RH6122-1AQ00 SIRIUS Contactor Relay, 2NO+2NC

MPN3RH6122-1AQ00

Siemens SIRIUS contactor relay, size S00, 2 NO + 2 NC auxiliary contacts, AC coil, screw and snap-on mounting for 35 mm standard mounting rail.

Add to RFQ

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

3RH6122-1AQ00 — Identification
Parameter	Value
Contactor frame size	S00

3RH6122-1AQ00 — Ratings & Performance
Parameter	Value
Rated operational current, AC-12, max.	6 A
Rated value @ 400 V	3 A
Rated value @ 690 V	1 A
Rated value @ 230 V	10 A
Rated value @ 24 V	6 A
Rated value @ 110 V	3 A
Rated value @ 220 V	1.2 A

3RH6122-1AQ00 — Control & Coil
Parameter	Value
Control supply voltage type	AC
Rated value @ 50 Hz	0.8 ... 1.1
Rated value @ 50 Hz	380 V

3RH6122-1AQ00 — Contacts & Poles
Parameter	Value
Auxiliary contact reliability	1 faulty switching per 100 million (17 V, 1 mA)

3RH6122-1AQ00 — Connection & Mounting
Parameter	Value
Conductor cross-section, solid or stranded	2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²), 2x 4 mm²
Conductor cross-section, finely stranded w/ ferrule	2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²)
Mounting method	screw and snap-on mounting onto 35 mm standard mounting rail

3RH6122-1AQ00 — Durability
Parameter	Value
Durability (operating cycles, typ.)	30 000 000
Durability with aux. switch block (cycles, typ.)	10 000 000

3RH6122-1AQ00 — Environmental
Parameter	Value
Operating temperature range	-25 ... +60 °C
Storage temperature range	-55 ... +80 °C
Installation altitude, max.	2 000 m

3RH6122-1AQ00 — Mechanical
Parameter	Value
Width	45 mm
Height	57.5 mm
Depth	73 mm

3RH6122-1AQ00 — Specifications
Parameter	Value
At AC	10 000 1/h

Product details

It carries 2 normally open and 2 normally closed auxiliary contacts, giving you four isolated signal paths for feedback, interlocks, or PLC inputs.

The auxiliary contacts are rated for AC-12 duty at 6 A at 24 V, 3 A at 110 V, and 1.2 A at 220 V. For higher voltages, they handle 10 A at 230 V, 3 A at 400 V, and 1 A at 690 V.

Coil and control supply

The control supply voltage is AC. Pick-up power of the magnet coil is 37 VA; holding power drops to 5.7 VA. The inductive power factor at closing is 0.8, so factor that into transformer sizing if you're driving multiple contactors from a single control transformer.