Skip to main content
Siemens 3RK1005-0LB00-0AA0 — Remote I/O & Fieldbus Modules

Siemens 3RK1005-0LB00-0AA0 SIRIUS IO-Link Master, 4 Ports, 1

MPN3RK1005-0LB00-0AA0

Siemens SIRIUS ET200S interface module, 3RK1005-0LB00-0AA0, IO-Link master with 4 ports, 15mm width, 24 VDC, IP20.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

3RK1005-0LB00-0AA0 — Identification
ParameterValue
Product designationET200S interface module for SIRIUS controls with IO-Link
3RK1005-0LB00-0AA0 — Environmental
ParameterValue
Ingress protection (IP)IP20
Storage temperature range-40 ... +70°C
Shock resistance15g / 11 ms
Pollution degree2 according to IEC 61131
3RK1005-0LB00-0AA0 — Mechanical
ParameterValue
Width15mm
Mounting methodclip-on

Product details

The Siemens 3RK1005-0LB00-0AA0 is a SIRIUS ET200S interface module that serves as a 4-port IO-Link master for SIRIUS switching technology devices. Each of the four ports supports IO-Link communication at COM2 rate (38.4 kBaud), with a maximum process data size of 8 bytes per port and 32 bytes total across all ports. The module can also operate with IO-Link deactivated, functioning as standard digital I/O. Powered by a 24 VDC supply, it draws a maximum of 0.3 A and includes reverse polarity protection. Each port is short-circuit rated at 0.4 A.

At just 15 mm wide, the module packs four IO-Link master ports into a single slice, saving DIN-rail space in dense ET200S stations. It mounts in any position and clips on without tools. Rated for horizontal operation at 0 to 60°C and vertical at 0 to 50°C, with humidity tolerance of 15 to 95% non-condensing. Shock rated at 15 g for 11 ms, vibration at 0.35 mm / 5 g. Pollution degree 2 per IEC 61131 means it's suited for clean, dry control-room environments. ESD immunity meets 4 kV contact / 8 kV air discharge per IEC 61000-4-2. Insulation voltage rated at 500 V. Maximum installation altitude 2000 m.

Frequently asked questions

What is the width of this module?

The module width is 15 mm, allowing dense packing on a DIN rail within an ET200S station.

What is the maximum process data size?

Each IO-Link port supports up to 8 bytes, with a total maximum of 32 bytes across all four ports.

What IO-Link transfer rate does it support?

It operates at COM2 rate, which is 38.4 kBaud.

What is the supply voltage requirement?

It requires a 24 VDC supply and draws a maximum of 0.3 A. Reverse polarity protection is built in.

MPN
3RK1005-0LB00-0AA0