The Siemens 3RK1322-0ES02-1AA3 is an AS-interface compact reversing starter from the SIRIUS family — an electromechanical motor starter with bimetal overload protection, built into an IP65 enclosure for direct machine-mount or washdown-area deployment without a separate panel. Rated 0.1 kW at 400 V AC-3 (setting range 0.28–0.4 A), it handles small reversing motor loads — conveyors, diverters, valve actuators — where the line-side AS-i bus carries both power and control, eliminating parallel control wiring.
The 0.28–0.4 A setting range and 0.1 kW at 400 V AC-3 define the motor it can reverse-start — small three-phase induction motors up to that power. The bimetal overload matches motor thermal characteristics directly; no separate overload relay needed. The integrated motor brake output (product component Motor brake output = Yes) handles a 400 V AC brake coil, so a separate brake contactor or relay is not required for motors with holding brakes. Two integrated inputs (type of assignment = 2) let you wire limit switches or pushbuttons directly into the starter, reducing the I/O count on the AS-i master.
Connections are tab terminals for the main current circuit (0.2–2.5 mm² ferruled stranded typical), and the 9-pole motor outgoing feeder and 9-pole power connection plug mate with standard AS-i flat cable or round cable via the integrated bus interface. Dimensions 270 mm high × 120 mm wide × 190 mm deep — allow clearance for the tab terminals and the 9-pole connector on the bottom; the IP65 housing has no DIN-rail clip, so plan for screw-mounting or bracket attachment. Ambient operating range -25 to +55 °C covers most indoor and outdoor installations; derate the setting range if ambient exceeds 55 °C.
For volume or consignment-bin programs, the steady lifecycle makes this a candidate for auto-replenish scheduling.