Skip to main content
Siemens 3RK1902-1GB30 — Remote I/O & Fieldbus Modules

Siemens 3RK1902-1GB30 M12 Sensor/Actuator Cable, 4A, 3m

MPN3RK1902-1GB30
Active

Siemens 3RK1902-1GB30, M12 angled socket cable, B-coded, 2-pole, 4A per pin, 3m length, PUR sheath, open end.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

3RK1902-1GB30 — Electrical
ParameterValue
Rated surge voltage1.5kV
3RK1902-1GB30 — Environmental
ParameterValue
Pollution degree3

Product details

Cable and connector details

The Siemens 3RK1902-1GB30 is a pre-assembled M12 angled socket cable, B-coded, with a 3-meter polyurethane (PUR) sheathed cable and open ends on one side. It carries two poles rated at 4 A per pin maximum, suitable for powering or switching sensor/actuator loads in control cabinets or junction boxes. The angled outlet and M12 x 1 thread locking collar fit tight panel layouts where a straight plug would strain the cable.

Mechanical and environmental ratings

The PUR jacket resists mineral oil, grease, and water — but the manufacturer flags these as application-dependent, so verify compatibility with the specific coolant or lubricant on your line. The cable withstands 5 million bending cycles, making it a candidate for drag chains or moving cable tracks.

Frequently asked questions

What approvals does the 3RK1902-1GB30 carry?

It holds UL, CSA, and IEC approvals, plus RoHS conformity. CCC and C-Tick are not listed, so separate certification may be needed for China or Australia.

What is the ampacity and cable length of this M12 cable?

Each of the two pins is rated at 4 A maximum. The cable length is 3 meters with a PUR sheath and open ends.

MPN
3RK1902-1GB30